Sheet finishing

Authors & references

Authors:

Professor Jouni Paltakari, Aalto University

Based on: Hämäläinen, A., Pirnes, L., Roos, H. and Lantto, E., Sheet finishing, (Chapter 4), In: Rautiainen, P. (ed.), Papermaking Part 3, Finishing, (Book 10), Papermaking Science and Technology. 2nd ed. Finnish Paper Engineers´ Association /Paperi ja Puu Oy. Porvoo, 2010, p. 326–400. More literature references can also be found in this chapter.

References:

1. Grygotis, R. C., Cut Size Sheeting, TAPPI 1993 Sheeting and Packaging Seminar Notes, TAPPI PRESS, Atlanta, p. 87.
2. EN ISO 216:2007, Writing papers and certain classes of printed matter – Trimmed Sizes – A and B series, and indication of machine direction. European Committee of Standardization (2007).
3. ANSI INCITS 151—1987(R2002). Bond Papers and Bristol Papers – Common Sheet Sizes. Bond Papers Basis Weights 49—90 g/m², American National Standard Institute (1986).
4. EN ISO 217:2008. Paper. Untrimmed Sizes. Designation and Tolerances for primary and supplementary ranges, and indication of machine direction. European Committee of Standardization (2008).