Stress relaxation

Authors & references

Edited by:

Professor Jouni Paltakari, Aalto University

Based on: Ketoja, J. Rheology (Chapter 8). In: Niskanen, K. (ed), Paper Physics, (Book 16), Papermaking Science and Technology. 2nd edition. Jyväskylä, 2008, Finnish Paper Engineers’ Association/Paperi ja Puu Oy. pp. 295 – 318.

References:

1. Johanson, F. and Kubát, J., Svensk Papperstid. 67(20):822(1964).

2. Craven, B. D., Appita 16(2):57(1962).

3. Kouko, J., Salminen, K., Kurki, M., Paper and Timber 89(7-8):424(2007).

4. Ketoja, J. A., Tanaka, A., Asikainen, J., Lehti, S. T., in Proceedings of the International Paper Physics Conference, PAPTAC, Gold Coast, Australia (2007). 5 pp.

5. Lif, J., Analysis of the time and humidity-dependent mechanical behaviour of paper webs at offset printing press conditions. Ph. D. thesis, Stockholm, Sweden: Royal Institute of Technology (2003). 132pp.

6. Rance, H. F., Tappi 39(2):104(1956).

7. Johanson, F., Kubát, J., and Pattyranie, C., Svensk Papperstid. 70(10):333(1967).

8. Brostow, W., Kubát, J., J. Phys. Rev. B 47(13):7659(1993) and Blonski, S., Brostow, W., and Kubát, J., Phys. Rev. B 49(10):6494(1994).

9. Htun, M. and de Ruvo, A., Tappi 61(6):75(1978).

10. Skowronski, J. and Robertson, A. A., J. Pulp Paper Sci. 12(1):J20(1986).

11. Gates, E. R. and Kenworthy, I. C., Paper Technology 4(5):485(1963).

12. Padanyi, Z. V., “Physical aging and glass transition: effects on the mechanical properties of paper and board”, Products of Papermaking (C. F. Baker, Ed.), Pira International, Leatherhead, 1993, vol. 1, pp. 521–545.

13. Sanborn, I. B., Tappi 45(6):465(1962).

14. Hill, R. L., Tappi 50(8):432(1967).

15. Glasstone, S. K., Laidler, K. J., and Eyring, H., The theory of rate processes, McGraw-Hill, New York, 1941.

16. Caulfield, D. F., Wood Fiber Sci. 17(4):504(1985).