Basic control functions in continuous digesters

Authors & references

Authors:

Professor Emeritus Kauko Leiviskä, University of Oulu

References:

1. Sutinen, R., Joensuu, I., Furst, P., Leiviskä, K. 1990. Advanced Kamyr digester control. In: 1990 EUCEPA Conference Proceedings. Stockholm, May 9–11. SPCI. pp. 253–264.
2. Gilbert, W., Trush, I., Allison, B., Reimer, R. and Mason, H. 2017. Dry chip feed rate control using online chip moisture. TAPPI PEERS, Norfolk, Virginia.
3. Chircoski, J., Leclerc, M. and Morissette, L. 2013. Improved Continuous Digester Controls using Wood Chip Analyzer at Zellstoff-Celgar. PACWEST 2013 Technical papers, Sun Peaks, B.C.
4. Keinänen, P., Rinne, R., Poranen, T. 2002. New analysis methods for better digester management. African Pulp and Paper Week. Durban, South Africa, Oct. 8–11.
5. Badwe, A. and Satini, R. 2016. Continuous digester optimization using advanced process control. Control Systems 2016, April 27–28, Stockholm, Sweden.
6. Ahvenlampi, T., Malmi, T., Liedes, M. and Ikonen, E. 2010. Energy efficient control techniques in continuous cooking application. IFAC Proceedings Volumes, 43(1):297–302.
7. Lindgren, T., Gustafsson, T., Forsgren, H., Johansson, D. and Östensson, J. 2005. Model predictive control of the chip level in a continuous pulp digester, a case study. Pulp & Paper Canada 106(11):46–51.
8. Jutila, E. 1979. Applicability of Kraft cooking control models. Acta Polytechnica Scandinavica. The Finnish Academy of Technical Sciences. Helsinki. 89 p. ISBN 951–666–109–2.
9. Vroom, K. E. 1957. The H-Factor: A means of expressing cooking times and temperatures as a single variable. Pulp Paper Canada. 58(3)228–231. ISSN 0316–4004.