Oxygen delignification

Authors & references

Edited by:

Professor Emeritus Kauko Leiviskä, University of Oulu

Based on: Leiviskä, K., Process control in the fibre line (Chapter 5). In: Leiviskä, K. (ed), Process and Maintenance Management, (Book 14), Papermaking Science and Technology. 2nd edition. Jyväskylä, 2009, Paper Engineer’s Association/Paperi ja Puu Oy. pp. 95–130.

References:

1. Saldivia, M.A.G. 2003. Two-Stage O2 Delignification System Cuts Mill’s Chemical Use, Boosts Pulp Quality. PaperAge, January 2003:18-24.
2. ABB Asea Brown Boveri Ltd. OPT800 Oxygen. [Online] Available from: https://new.abb.com/pulp-paper/abb-in-pulp-and-paper/systems/control-systems/advanced-process-control/opt800-oxygen [Accessed 11^th March 2020].
3. Kubulnieks, E., Lundqvist, S.-O. and Sandström, P. 1988. The STFI OPTI-Kappa Analyzer – Applications and Accuracy. TAPPI J. 70(11):38–42.
4. Pettersson, T., Edlund, S. G. and Kubulnieks E. 1985. STFI’s kappa number meter – a much in demand on-line sensor. Svensk Papperstidningning. 88(16):14–23.