Optimisation in pulp bleaching

Authors & references

Authors:

Professor Emeritus Kauko Leiviskä, University of Oulu

References:

1. Keski-Säntti, J., Leiviskä, K. and Lampela K. 1999. Production optimisation of the pulp bleach plant – intelligent methods utilisation approach. SPCI 6th International conference on new available technologies, Stockholm, Sweden, 402-408.
2. Keski-Säntti, J. 2007. Neural networks in the production optimization of a kraft pulp bleach plant. Doctorate Thesis. University of Oulu. Acta Univ. Oul. C 280, 110 s.
3. Dumont, G., van Fleet, R. and Stewart, G. 2006. A setpoint generation tool for optimal distribution of chemical load between bleaching stages. Pulp & Paper Canada 107(7/8):T175-177. (Paper presented at the Control Systems 2004 in Quebec, Quebec, June 14-17, 2004).
4. Major, D., Perrier, M., Gendron, S. and Lupien, B. 2005. Pulp bleaching control and optimization. 16th IFAC Triennial World Congress, Prague, Czech Republic.
5. Flisberg, P., Nilsson, S. and Ronnqvist, M. 2007. Optimized On-Line Process Control of Bleaching Operations with OptCab. NHH Dept. of Finance & Management Science Discussion Paper No. 2007/9.
6. Jain, S. and Mortha, G. 2010. Optimization of Full ECF Bleaching Sequences Using Novel Models. In Modelling Simulation and Optimization (Edited by Gregorio Romero Rey and Luisa Martinez Muneta), InTech.
7. Castro, J.J. and Doyle III, F.J. 2003. A Pulp Mill Benchmark Problem for Control: Problem Description. Journal of Process Control 14(1):17-29.
8. VanBrugghe, C., Perrier, M., Desbiens, A. and Stuart, P. 2004. Real-time optimization of a bleach plant using an IMC-based optimization algorithm. Proceedings of the Control Systems Conference. Quebec City, Quebec, Canada, 21–24.
9. Antelo, F.S. and Zhang, J. 2007. Improved Bleach Plant Control Using Internal Model Control with Smith Predictor. 16th IEEE International Conference on Control Applications Part of IEEE Multi-conference on Systems and Control, Singapore, 1-3 October 2007.