Man-made bio-based fibre products
- Introduction to man-made bio-based fibre products
- Man-made bio-based fibre products and their end-uses
- Textile fibres, processing and end-uses
- Key aspects of the down-stream conversion processes
- Manufacturing processes of bio-based fibres
- Scientific principles of polymer fibre forming
- Alternative and emerging processes for bio-based synthetic fibers
Printing of textiles Traditional methods A traditional two-colour machine engraved cylinder, mounted on a steel mandrel, is forced against the fabric being printed as it travels around a pressure bowl with resilient covering. The machine must be of robust construction because pressures of several tonnes are applied, and each mandrel is driven by a single
Authors & references
Author:
Pertti Nousiainen
References:
- Burkinshaw, S. M.1995. Chemical Principles of Synthetic Fibre Dyeing, Blackie academic & professional, ISBN 0-7514-0043-2, Glasgow, UK.
- Murray, A. & Mortimer, K. 1971. Carrier Dyeing, Rev. Prog. Coloration, Vol. 2, No. 1, (May 1971), pp. 67–72, ISSN 0557-9325.
- Patterson, D. & Sheldon, R. P., 1959. The Dyeing of Polyester Fibres with Disperse Dyes. Mechanism and Kinetics of the Process for Purified Dyes, Trans. Faraday Soc., Vol. 55 (1959), pp. 1254-1264, ISSN 0014-7672.
- Shah Miran Patwary, Antimony diffusion from polyester textiles upon exhaust dyeing. Thesis for the Degree of Master in Textile Engineering, The Swedish School of Textiles, Borås, 2017-09-05 Report no: 2017.14.10
- Arthur Fisher Dyeing methods for wool Contemporary wool dyeing and finishing CSIRO
- Textile Printing, 2nd Ed. Leslie W C Miles, University of Manchester, Institute of Science and Technology, Manchester, UK, Society of Dyers and Colourists, 2003, 330 pp.
- Handbuch der Textilhilfsmittel. Herausgegeben von A. Chwala und V. Anger in Zusammenarbeit mit Ch. Chwala. Verlag Chemie GmbH, Weinheim–New York 1977, 1. Aufl., XVI, 1158 S., 316 Abb., 175 Tab.
Videos
Exercises
This page has been updated 09.12.2020